Automotive: Past And Present

November 22nd, 2017

Today's drivers, perhaps, it is difficult to imagine a model of a car without glasses. Meanwhile, exactly as were the first car. Cars the late nineteenth century to form little different from the open horse-drawn carriages carts. However, the rate of 'iron horses' speed was higher than their living counterparts, and therefore it was necessary to protect the occupant from the air stream. So in the car appeared windshield. The first auto-glass produced from the same material as regular windows. Of course, this glass was very fragile and broke into pieces upon impact, which posed a considerable danger to the occupants of people. Several later began to use tempered glass, but it is broken up upon impact.

Shatterproof Automotive solution was found in the 20e's, when construction vehicles used the new invention of the French scientist, created a three-layered glass, consisting of two layers of glass and a layer of film between them. The essence of the invention was that the three-layer glass, laminated glass, or, at impact is not divided into fragments, and remained on the film. Installation auto glass, made using the new technology has made travel by car is much safer, as shards of glass are not traumatized passengers. In addition, the installation of a windshield of laminated glass has contributed the fact that the replacement windshield was performed less frequently. Now you do not have to change all the glass due to minor cracks. Another material for the production of auto-glass – Stalin – is also a product of French scientists. It was invented in 1929 and has since been widely used in automotive.

Stalin – it has often hardened, solid glass. Feature it is that if the force of impact is very high and the glass of stalinite is broken, it shatters into small pieces with blunt edges that do not hurt people. Today, for the manufacture of auto-glass is used as a triplex, and Stalin. Production technologies continue to evolve. In particular, are spreading atermalnye glass that trap heat of sunlight, allowing the passenger compartment is not heated. Developed a variety of coatings that reduce pollution glasses. Applied electric heating of glass. Create a glass with high sound insulation. Future plans include the creation of super-strong glass that can withstand even the most severe blows.

Tags: ,

Car Racing

April 26th, 2017

The invaluable experience of racing in Formula 1 Championship, DTM, BTCC and NASCAR have led to model performance in many categories. The use of technology increases the contact patch ActiveBraking bus in a dangerous time traffic – braking – when the vehicle while under the influence of inertia can be partly or fully lose traction with the road. Tread tires with conventional ribbed blades virtually transformed into a moment of braking, tread Goodyear Eagle F1 Asymmetric 2 consists of modifying the special blades original profile, the area where the load is increased, allowing to extend the contact patch. Because increased levels of grip, and braking distance is shorter. See more detailed opinions by reading what Kai-Fu Lee offers on the topic.. Stock handling on dry roads Eagle F1 Asymmetric Frame 2 is a cross-geometric structure made of several layers of textile yarn, to provide excellent steering response vehicle on dry pavement.

The new tread compound, made by racing technology to help unleash the potential of handling high-power vehicles that now had the opportunity to more load brake system and improve safety by reducing the braking distance. The predominance of silica in the tread resulting in lower weight tires compared to its predecessor, which helps increase fuel economy and reduce unsprung mass. The minimum stopping distance on wet surface advanced technology ActiveBraking, a unique rubber compound containing high molecular weight polymers, made by “racing” formula, expanded the sports car handling and allowed achieved record results in wet road conditions. “It is impossible to prepare all the surprises, which presents us with a road – said Hugues Despre, brand director Goodyear passenger areas in the Middle East and Africa. – But when it comes to braking at high speed, every second, every inch of the braking distance is crucial.

With a new generation of summer tires Eagle F1 Asymmetric 2, we succeeded in expanding the capacity of handling powerful vehicles and help drivers feel more confident in a variety of unusual situations, whatever the weather. ” Low noise level, durability and comfort Along with high performance and record performance clutch tire Goodyear Eagle F1 Asymmetric 2 has a number of characteristics for which fans will pay attention to quality and comfort. The tread pattern blocks with optimized blades made in the proportion of 64:72, giving priority to inside – it improves comfort and reduces noise while driving. Hard tread, sidewalls and flexible technology ActiveBraking in combination contribute to optimal load distribution along the perimeter bus, increasing the lifespan. Top world producers have already made their choice and in the base version equipped with the powerful new generation of car tires Goodyear Eagle F1 Asymmetric 2: Alfa Romeo 159, Porsche Panamera, Mercedes-Benz E-Class and the Ferrari California. The world premiere of Goodyear Eagle F1 Asymmetric will be held within two Geneva Motor Show in March 2010, after which will begin official sales.

Tags: ,


July 31st, 2013

Follows the established routines is important to parents to keep routines established at home, so children are not desubiquen. While MOM or dad already do not live in the same House, life continues. Therefore, that means that Dinner starts at 5 pm, football practices are still at the same time, etc. You must follow the routines. Show children that must move forward with the routines and life and that someday, the emotions will stabilize. Show them love after a divorce at the end of the whole process of divorce, children need the security that their parents are still with them, no matter what happens. No matter if they are children small, teenagers, pre-teens or adults, will always have the guarantee that their parents will be there when they need them emotional, physical or materially. Other tips for an effective parenting after divorce 1 coeducation) keep the emotions under control.

You may have some persistent anger, sadness and resentment between you and your former partner, but this does not include your children. Give them the benefit of having parents who work together for the sake of their children, instead of shouting, scolding and absurd fights and even insults that do not make sense after the divorce. (2) Think in children first and foremost. Your children are what really matters, not what you feel by your former spouse. No matter what kind of disputes reach, where spend holidays or the money problems that you have.

Take the time to consider the wishes of your children and choose only the best for them. (3) Communicate. It will be very difficult to be a good father after a divorce experience if you don’t have a good communication with the other parent. Trafficking to share news about school events or updates on the health of your children, be sure to share all relevant information with the other parent. (4) Do not speak badly of the other parent. Think twice before you speak against your ex-spouse, can affect you more than benefit. If you don’t already love to your ex, your children Yes and deserve an environment that does not try to manipulate them or burle feelings. Original author and source of the article

Tags: , , ,

KAMAZ Auto Equipment

December 14th, 2011

In our homeland and neighboring countries is no more popular models of trucks than the "KAMAZ". With someone's filing of television advertising has spread to people catch phrase about tanks that are not afraid of dirt. Discussed in this the video was about specialized equipment automobile "KAMAZ". Keep the brand of the Kama Automobile Plant and domestic trucks, both among our compatriots and overseas to help the annual inter-ethnic racing. Numerous wins in the major ranges enable the production of vehicles "KAMAZ" and their varieties to withstand strong competition from foreign producers counterparts. As a result, similar rally nakaplivaetsyabogaty experience of using machines to the limit modes. Later, this experience is taken into account in the modernization of old and construction of new production models.

Detected, so called bottlenecks, made tests developed technical solutions. Trucks "KAMAZ" on demand in all sectors of industry and transportation. Special vehicles based on chassis "KAMAZ", using additional equipment and the equipment is operated quite successfully in the construction and transportation equipment. Road freight transport and equipment on the chassis of "KAMAZ" you can meet in the south to the steppes of Russia, and in northern regions of permafrost. Serious cross-country, simplicity of service and constant availability of components (based on experience we can say that parts KAMAZ find it easier than what either spare parts) adequately maintain a high level of durability and glory of these cars.

From his early years in our minds cargo equipment associated with shovels, tractors, mobile cranes and dump trucks. Cargo Technology plays a special role: the development and mining operations, in transportation of bulk and liquid cargo in any construction and renovation of residential and non-residential premises, in digging ditches and laying pipelines, loading and unloading. Automaker "KAMAZ" trucks range is such cars: a) Dump the three groups of capacity, up to 13 tons (KAMAZ-43 225), from 13 to 20 tons. (KAMAZ-5511, KAMAZ-65115, KAMAZ, 6520) and more than 20 tons (65 201 KAMAZ). b) tractors with 4×2 (KAMAZ-5460), 6×4 (KAMAZ-54115, KAMAZ-6460), 6×6 (44 108 KAMAZ, KAMAZ 65 226). c) on-board vehicles with 4×2 (KAMAZ-4308 KAMAZ 43253), 4×4 (KAMAZ-4326), 6×4 (KAMAZ-53215, KAMAZ-651 170), 6×6 (KAMAZ-43114, KAMAZ-43118). d) chassis (model are the same model and airborne vehicles). Based on the chassis of the Kama automobile plant widely exploited in the construction and loading and unloading cranes and cranes. a) The crane model "Ivanovets" with boom and load capacity, respectively: fourteen feet, seventeen tons (COP-35 714-2, 35715-2), eighteen meters, 16 tons (35 714 CF, CF-35 715), twenty-one meter, twenty-five tons (COP-45 717), 27 m, 32 tons (CS-5576B), 31 m, 50 ton (COP-6476). b) crane model "Galician": 21.7 m, twenty-five tons (55 713 COP), twenty-six feet, thirty-ton (COP-55 715), 30 m, 32 ton (COP-55 729), twenty-nine meters, 36 tons (COP -55 721). c) the crane "Klintsy": 18 m, sixteen tons (COP-35 719), twenty-one-meter, 20 ton (COP-45 719) 21 m, twenty- pyattonn (COP-55 713). The superiority of whatever technology is losing relevance in a lack of spare parts and qualified service required. In Russia, the dealer network support functions of the plant "KAMAZ", implementing genuine spare parts KAMAZ. These mediators, as Avtokom who received the official license of the plant "KAMAZ" exercise maintenance services and parts for sale "KAMAZ" (the official site online dealer). At the same time carried out beneficial cooperation, and direct customer wins in many aspects. In mediation centers, anytime you can find the latest information about the cost and produced models, and at the same time obtain the necessary and competent service.

Tags: ,


© 1999-2020 My Phone Net All Rights Reserved