Work With Decorative Stickers, Donna

July 29th, 2019

Greeting cards effectively decorate simple DIY technique with decorative stickers and foam adhesive ornaments ideal for beginners and those who want to get more out of your greeting cards. Contact information is here: Michael Dell. With this guide, we want to show you how much you have more options with decorative stickers. These can be glued not just as an ornament on a greeting card, but you can work with them very much more. With the so-called Donna s 3D Foamies, endless possibilities give the combination. Charles Koch might disagree with that approach. Short information to the Foamies: foam glue ornaments are, as we know it already from the 3D technology. In the 3D we use technology as Abstandspads to obtain the three-dimensional effect. The Foamies are placed in the form Schaumpads. Exists in many different forms.

You can decorate them with glitter, sand & co. but also with metallic effect slides or flower soft. And best of all: it is very easy, it goes very quickly and there is no cutting required. Required materials: hobby farm’s starter set: glitter Stickers & Donna’s 3D Foamies hobby knife alternative: Sandy type sand, metallic effect slides, flicker, or flower soft folds a carton desire, so that you are a greeting card in the format DIN A6 to you. (In our example, we have used a Blue Pearl paper.) Then an embroidery motif choice arc solve and glue on the paper. We have used a framework with dolphins by the sticker J20800.

Solve a dolphin out of the matching Donna’s 3D Foamies of arch Maritimes (J33210). The Foamies have a very good adhesion, therefore dissolve the individual motifs with a hobby knife carefully from the sheet. The complete arc something turn, then can be solved very well out the subject. Glue the motif on the proper position of the sticker sheet. Glue four foam”dolphins on the sticker. Then with the craft knife carefully remove the top protective layer. Now it can go decorate on’s. Sprinkle a glitter color of your choice in the foam ornaments until the ornament is completely covered. The glitter with a brush or your fingers tight Press and absorb the excess glitter. Now, the matching Starfish from the Foamies sheets solve and stick on the stickers. Sprinkle the starfish with a glitter in a contrasting colour, glitter press down firmly and recapture the excess glitter. Finally, we decorate even the edges of the map. Glue, from the sticker sheet J20810 loosen both curlicue lines with seahorse from the sticker sheet and on the map. The best seahorse from the Foamies Donnas 3D bow 2 x Peel and stick on the stickers. Remove the protective layer from the Foamies and good sprinkle both seahorses with glitter. The glitter also here again firmly and absorb the excess glitter. There’s a whole fast, to decorate but very beautiful art cards our finished greeting card in the 3D look. On our pages you will find a download area, where you can download for free our instructions.

Tags: ,


July 23rd, 2019

Your Muse is just as lazy as you want it to be. I have a friend who told me that it was not possible to write if the Muse does not want to and because to tell the truth even if I liked your way of writing already since then, I have to admit that it is not as if already then was he as good writing to take his advice to the letter on this art in particular. Even more, I now can not believe you nothing because I know how can I wake my muse at any time. Everything is in the attitude in the chemical reactions that are in your brain: endorphins, serotonin and many more everything begins with knowing that it is possible to learn how to communicate better with your Muse. The thing is that your Muse is a part of your unconscious and as such, operates as a part of it (as your arm or your understanding of the language).

When one learns to ride a bike, the first thing you have to master is the fact of being on the bike itself. Why security wheels are used many times to learn how to ride a bike. Once you know how to control the bike properly, you are comfortable in it and you can use either with casters, the next step is to learn how to keep your balance without them. First dominate a part of learning to ride a bike and then you learn the rest. Finally, once you know cycling, the only thing you have to do is access the mental program and you can do it easily every time. The same happens with learning how to handle a car, even with learn to speak a language (either your tongue or particularly secondary languages).

The same applies to learn to awaken your Muse at any time. It is easy, once you learn to do so. Some believe that there is a recipe to learn how to wake up your Muse. This is more or less true. The truth is that in the majority of cases, a same formula can be applied to awaken creativity and that formula works. However, that formula would work only in the majority of cases, and not in all. The thing is that the essence of learn to awaken your Muse, as well as the essence of learn to walk bicycle, cannot be transmitted only through words (can be transmitted only partially) because they require an experience (you have to live it) in order to learn. In this case, learn by doing, much more reading (although this is not to say that no se aprende also reading, because Yes, reading is a good way to learn).

Tags: , , ,

Buying A Compressor – What To Look For

July 14th, 2019

Buying a compressor – an important event. Traditionally, pay attention to the present model, the new or the same buffer, the country of manufacture, model type – horizontal, vertical, overhead, portable, stationary, volume performance, as well as the volume of the receiver, which determines how effectively run your air compressor. However, it's not all – for example, important management option, as well as system outages established a system for emergency shutdown, when and under what conditions it will operate. Very often the compressors have to work in hostile environments, under constant pressure drop of air at different composition of the air mass, which is strongly influenced by factors of pollution, ecological condition in certain areas, sharp drops in pressure, temperature indicators, humidity content in air mass more harmful for the technique of impurities. On compliance rules of operation to date is still open.

Of great importance are indicators of capacity, both at the input and output – note that they are changing. Compressed air has other indicators, rather than the mass of air that has not yet been processed, which is logical. Are also important indicators of sound pressure – there is a compressor piston, which operate with minimal noise effects, but it affects their price. When buying experts advise to draw attention to the normal operating pressure, as well as overall performance, especially if purchase is made through an online store in order to save. Indicators of the ac power inlet and the total power will give you a general idea on what kind of an aggregate capacity of unit costs count.


Powder Paint. Powder Coating .

July 13th, 2019

The process of coloring powder paints is divided into three stages: 1) Surface Preparation. Purification of oils, oxides, rust, etc. Cleaning can be done mechanically or by means of liquid or solvent. Source: Dell. 2) Application special paint sprayers. The powder comes in a spray, where it mixes with air. Next, the painted product passes through the diffuser, which houses the high voltage source. Particles of powder paint, passing by high-voltage source, acquire the necessary electrical charge.

Flew past be coated products, the particles stick to the surface. Coating thickness (thickness) is governed by the parameters high-voltage source. 3) Baking paint. Conducted at a temperature of about 200? C. After baking paint, the product is cooled at room temperature for about 15 – 20 min. Mikkel Svane has firm opinions on the matter. Thus, powder okraskay – waste-free and environmentally friendly technology for producing high quality decorative and protective or simply decorative and coatings.

Coating is prepared by coating polymer powders on the painted surface of the product. For application powder coatings are suitable metal parts, glass and ceramics. Powder coatings today processed approximately 15% of coated products in the world. There are two types of electrostatic spray. Tribostatic spraying. In this case, the particles acquire a charge as a result of wall friction turbine . 'Tribo' translates as 'friction'. When tribostatic spraying paint is applied with compressed air and retained on the surface due to the charge, acquired as a result of friction on-insulator ptfe, of which the parts of the spray gun. Power source when using tribostatic deposition is not required, so this method is much cheaper. It is used for coloring products which have a complex shape. Disadvantages tribostatic method – a low level of electrification, significantly reduces its performance compared with the electrostatic spraying. Electrostatic spraying. When using this method, the particles acquire a charge from an external source of electricity (high voltage is applied equipment). As a result, powder paint acquires an electric charge through the ionized air in a corona discharge between the surface and the electrode charging head. Corona discharge supported by high-voltage source, a built-in diffuser. The disadvantage of the electrostatic spraying of powder coatings are possible difficulties with the application of paint on the surface with the deaf holes and grooves – as paint particles are deposited primarily on the protruding areas of the surface, it could be Through Coloured Rustic Candles unevenly.

Photoelectric Fires

July 12th, 2019

Photoelectric smoke alarms are smoke detectors that use changes in a beam of light as an indicator of fire. These sensitive smoke detectors are ideal alarms for homes for the detection of slow fires that burn at low temperatures, such as mattresses and furniture fires, or fires that lurk beneath carpets and curtains. A photoelectric sensor is also included in dual sensor smoke alarms and alarms for fires that are specialty smoke alarms designed to react to multiple types of fires. Any type of home alarm or be located in any establishment, must be checked at least twice a year to ensure that it operates correctly. The inner workings of a photoelectric smoke alarm includes a (LED) light-emitting diode and a small sensor that is calibrated to register the subtle changes in the beam of light created by the LED. Under normal conditions, the light stays clear and stable. When there is smoke in the air particles, the beam of light goes dark. Depending on the photoelectric smoke sensor detector style lee light that is scattered as a result of the conditions of smoke or register a sudden darkness on the beam.

When sensors photoelectric smoke detectors recorded particulate in the air, they triggered a strong alarm that will sound noticeably. The sound indicates that you should leave the area or pay attention to the source of the smoke that is causing alarm. In some cases, photoelectric smoke alarms can be triggered by the smoke of the kitchen, incense, or similar conditions, in which case the alarm can shut down and restart. While photoelectric smoke alarms are a large fire safety tool, it is important to remember that fire extinguishers at suitable places in the House kept fully charged to make sure that small fires can be turned off.


© 1999-2020 My Phone Net All Rights Reserved